Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

-naäuC7$
Includes:
1. Scrapper Blade x 1
2. Angled Tube x 1
3. Straight Tube x 3
4. Angled Support Arm x 2
5. Steel Spring Button x 3
6. 1-1/2"
Bolt
x 2
7. 1/2"
Bolt
x 2
8.
Lock
Nut x 4
Foam
Handle
x 1
9.
1
Read,
Follow,
and Save
Warnings:
• Serious injury or death may occur in the event of falling snow. Never stand directly
roof
rake.
• Ensure the area is clear from debris and obstructions
• The roof rake is intended
• Do not use near electrical
Product
Satisfaction
At Extreme Max, we pride ourselves
not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
Warranty
This product
is warranted
for consumer
Warranty
valid only in the USA.
This product
is warranted
to the original
wear and tear expected.
This warranty
of goods or any acts of vandalism
commercial
use. The sole remedy under this warranty
or similar product,
or the refund of the original
or incidental
damages. Any and all freight charges to handle warranty
Extreme MaxTM is not responsible
For all inquries please send your name, mailing address, main contact phone number,
summary
of alleged defect and any applicable
Customer Service: service@extrememax.com
Poly Roof Rake Assembly
2
4
These
Instructions.
solely for snow removal and is not to be used to remove ice, sticks, leaves, or other debris.
wiring or transformers.
Guarantee
on making quality products
use for 2 years after the date of retail
retail purchaser
shall not apply to any defects caused by: (l) overloading,
by any person, (Ill) improper
purchase price. Extreme MaxTM is not responsible
for any labor charges that may be incurred.
pictures to service@extrememax.com.
5
9
8
before attempting
snow removal.
and wish to correct any mistakes on our end. If you are
purchase.
to be free from defects in material and workmanship,
installation
or use contrary to the instructions,
is at the discretion
of manufacturer:
claims are the responsibility
I www.extrememax.com
Instructions
5600.3262
3
under the roof edge while using the
Warranty
includes
parts only.
ordinary
(II) physical abuse
(IV)
the replacement
of the same
for any consequential
of the consumer.
original
retail sales receipt,
10
3399ex0120
loading

Sommaire des Matières pour Extreme Max 5600.3262

  • Page 1 Product Satisfaction Guarantee At Extreme Max, we pride ourselves on making quality products and wish to correct any mistakes on our end. If you are not 100% satisfied with the product, for any reason, please reach out to us. We are here to help!
  • Page 2 Installation Instructions Read all information included on page 1 before beginning operation or installation. 1. Locate the angled tube and place it onto the receiver in the center of the scrapper blade. The longer straight end should be against the blade while the angled end is away, slanting down to the same side as the bottom of the scrapper blade.
  • Page 3 électriques ou de transformateurs. Garantie De Satisfaction Du Produit Chez Extreme Max, nous sommes fiers de fabriquer des produits de qualité et souhaitons corriger toute erreur de notre part. Si vous n'étes pas satisfait å 100% du produit, pour quelque raison que ce soit, veuillez nous contacter.
  • Page 4 Instructions D'installation Lisez toutes les informations incluses å la page 1 avant de commencer l'utilisation ou l'installation. 1. Localisez le tube coudé et placez-le sur le récepteur au centre de la lame du racleur. L'extrémité droite la plus longue doit étre contre la lame tandis que l'extrémité coudée est éloignée, inclinée du méme cöté...