Extreme Max 5800.1045 Instructions De Montage

fWBfMfMU
PhamCt$
! Warning
Warning:
Read and understand all instructions before Read and understand
assembly or use. Failure to follow safety assembly or use. Failure to follow safety
guidelines may result in serious injury or guidelines may result in serious injury or
property damage.
property damage.
Do not exceed the maximum
Do not exceed the maximum rated load capacity of 1,000 lbs. (5800.1045 & 5800.1066) or 800 lbs.
(5800.1184). Overloading
(5800.1184). Overloading can cause structural failure, equipment damage, or personal injury.
Lifting machinery is inherently
Lifting machinery is inherently dangerous. Use caution at all times and ensure all personnel are clear of
moving parts during operation.
moving parts during operation.
Use only on a flat, stable surface to prevent tipping,
Use only on a flat, stable surface to prevent tipping, instability, or unintended movement.
Inspect all components
Inspect all components before each use. Do not use the equipment if any parts are damaged, missing, or
show signs of wear.
show signs of wear.
Keep hands, feet, and clothing
Keep hands, feet, and clothing clear of pinch points and moving parts during assembly and operation.
Never modify or alter the product.
Never modify or alter the product. Unauthorized modifications can compromise safety and void the
warranty.
warranty.
Use appropriate personal protective
Use appropriate personal protective equipment (PPE) such as gloves, steel-toed footwear, and safety
glasses during assembly
glasses during assembly and operation.
Never use an impact gun to operate the lift.
Never use an impact gun to operate the lift.
Before assembling
Before assembling your snowmobile lift you MUST properly
STOP
lubricate your jack. Failure to properly
lubricate your jack. Failure to properly lubricate the jack will
void the warranty.
void the warranty.
1.Remove the jack from the box. 1 . Remove the jack from the box.
2.Turn the jack clockwise to completely extend the jack to its highest point 2. Turn the jack clockwise
3. Remove the black 3/8" adapter by removing
3.Remove the black 3/8" adapter by removing the bolt at the base. [Figure 1 & 2]
4. Separate the two tubes so the large threaded
4.Separate the two tubes so the large threaded rod is exposed. [Figure 3]
5. Use a high viscosity
5.Use a high viscosity gear lubricant to generously lubricate the entire threaded rod. [Figure 4]
6. Thread the rod back into the tube and position the 3/8" adapter into its original position.
6.Thread the rod back into the tube and position the 3/8" adapter into its original position.
7. After installation, manually cycle the jack fully up and down twice to ensure the lubricant travels the
7.After installation, manually cycle the jack fully up and down twice to ensure the lubricant travels the
length of the rod. length of the rod.
Figure 1
Figure 1
Customer Service: service@extrememax.com
Customer Service: service@extrememax.com | www.extrememax.com
Pro Snowmobile
Pro Snowmobile Lift Assembly Instructions
all instructions before
rated load capacity of 1,000 lbs. (5800.1045
can cause structural
dangerous.
before each use. Do not use the equipment
clear of pinch points and moving parts during assembly
Unauthorized
equipment
and operation.
your snowmobile
to completely extend the jack to its highest point
gear lubricant to generously
Figure 2
Figure 2
Lift Assembly
5800.1045 5800.1045 - Pro Lift - Pro Lift
5800.1066 - Pro Lift with Wheel Kit 5800.1066 - Pro Lift
5800.1184 - Pro Aluminum Lift w/Wheel Kit 5800.1184 - Pro Aluminum
5800.1187 - Replacement Jack for 5800.1184 5800.1187 - Replacement
5800.9005 - Replacement Jack for 5800.1045/5800.1066 5800.9005- Replacement
failure, equipment
Use caution at all times and ensure all personnel
instability, or unintended
modifications can compromise
(PPE) such as gloves, steel-toed
lift you MUST properly
lubricate the jack will
the bolt at the base. [Figure 1 & 2]
rod is exposed. [Figure 3]
lubricate the entire threaded
Figure 3
Figure 3
I www.extrememax.com
Instructions
with Wheel Kit
Lift w/Wheel
Jack for 5800.1184
Jack for 5800.1045/5800.1066
& 5800.1066)
damage, or personal injury.
movement.
if any parts are damaged,
safety and void the
footwear,
for
for Instructional Video
rod. [Figure 4]
Kit
or 800 lbs.
are clear of
missing, or
and operation.
and safety
Scan the QR Code Scan the QR Code
Instructional Video
Figure 4
Figure 4
1 1