Extreme Max 5600.3247 Mode D'emploi

-naäuC7$
Warnings:
Risk of personal injury or property
in a sudden release of the
winch manufacturer's instructions
Includes:
I. Winch Plate
2. Flanged Hex Bolt x 4
3. Lock Nut x 4
Not Included:
1. Winch
2 Roller Fairlead
Prior to Installation:
I. Turn off vehicle and lock the
2. Locate the battery compartment.
Installation Instructions
I. Locate the two bolts at the front of the plastic fascia at the front of the ATV. Remove the bolts, then remove the fascia.
Insert the winch plate inside the ATV frame's front bumper and supports, aligning the mounting
2.
holes in the winch plate. Properly aligned, the winch plate will sit level inside the frame with the fairlead tab facing forward.
3. Secure the winch plate with a flanged hex bolt and lock nut at all four mounting
4. Using the winch manufacturer's
5. Place the plastic fascia back into its original
Customer Service: service@extrememax.com
Winch Mount
damage. An improperly
winch mount and/or winch
for proper mounting
2
brakes
Remove the ground terminal,
installation instructions, install the winch and roller fairlead onto the winch plate.
position and secure with the original
O
for Suzuki@ King Quad 400
mounted winch may result
from the ATV frame. Follow
and use of your winch.
1
0
3
then the positive terminal
hole locations. Tighten until snug.
hardware.
I www.extrememax.com
Part # 5600.3247
style # 100680
all
to disconnect the battery cables.
holes in the frame with the mounting
3518ex0121