Denon AVR-1604 Mode D'emploi page 39

Dolby Surround Pro Logic
1
Select the function to which the component you want to play
is connected.
Example: DVD
(Main unit)
2
Select the Dolby Surround Pro Logic
(Main unit)
• The Dolby Pro Logic indicator lights.
Display
3
Play a program source with the
• For operating instructions, refer to the manuals of the
respective components.
4 Select the surround parameter mode.
(Main unit) (Remote control unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5 Select the optimum mode for the source.
(Main unit)
MODE DOLBY PL
or
II mode
(Remote control unit)
II
mode.
(Remote control unit)
Light
mark.
Display
MODE cinema
(Remote control unit)
MODE cinema MODE music
or
1 2
2
1
8
5, 7
6 Set the surround parameters according to the mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
MODE Dolby PL
CINEMA EQ
TONE DEFEAT
SURROUND BACK SURROUND BACK
DEFAULT
If you do want the bass and trable to be adjusted, turn off
the tone defeat mode.
ENGLISH
4, 6 5, 7
The Dolby Surround Pro Logic
Cinema or Music mode can be
chosen directly by pressing the
CINEMA or MUSIC button on
the remote control unit during
playback in the Dolby Surround
II
Pro Logic mode.
4, 6
5, 7
(Remote control unit)
MODE CINEMA MODE MUSIC
CINEMA EQ PANORAMA
TONE DEFEAT DIMENSION
CENTER WIDTH
DEFAULT TONE DEFEAT
SURROUND BACK
DEFAULT
II
39