Technical Specifications - afx light DD4 Manuel D'utilisation

The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending
on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION: Disconnect from mains before starting maintenance operation!

TECHNICAL SPECIFICATIONS

Fuse (internal): ......................................................................................................... F-0.9A/250V PTC
Voltage: ......................................................................................................... AC 110-240V / 50-60Hz
Dimensions: ......................................................................................................................215 x 142 x 45mm
Weight: ..................................................................................................................................................0.5Kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about
the way to proceed.
© Copyright LOTRONIC 2018 DD4 Page 4