Regin REGIO ARDO Manuel D'instructions

INSTRUCTION
EN
REGIO
ARDO
IN20007 REV. F, 2020-05-07
Note! More information about the product can be found
in the manual, which is available for download from www.
regincontrols.com
Caution! Read and understand the instruction before us-
ing the product.
Caution! Ensure that the installation complies with local
safety regulations.
Caution! Before installation or maintenance, the power
supply should first be disconnected. Installation or main-
tenance of this unit should only be carried out by qualified
personnel. The manufacturer is not responsible for any
eventual damage or injury caused by inadequate skills
during installation, or through removal of or deactivation
of any security devices.
Box contents
The Regio Ardo box contains one baseplate (A), one controller unit (B),
and two terminal protection covers (C).
A
C x 2
Mounting
The controller is mounted either on a DIN rail, or on a wall above a false
ceiling. The controller form factor is EURO norm, which makes it fit
into a standard EURO norm cabinet.
DIN rail mounting
To mount the controller:
1. Pull out the fastener.
2. Attach the controller to the rail.
3. Push in the fastener to secure the controller.
Regio Ardo
Wall mounting
To mount the controller:
1. Attach the baseplate to the wall using screws.
B
2. Pull out the fastener and attach the controller to the baseplate, and
then push in the fastener to secure the controller.
1 (16)