CABASSE STREAM BAR Notice D'installation page 31

DLNA (WLAN) WIRELESS CONNECTION TO THE WIFI NETWORK
THERE ARE 2 SOLUTIONS TO CONNECT STREAM BAR TO THE WIFI
NETWORK:
1
WPS CONNECTION: push the WPS button of the wireless router for
2 seconds or more and push the WPS button of the STREAM BAR
within around 2 minutes (check for precise delays in the router's
manual). The connection is completed when the blue LED "WIFI"
is on. Now go to page 41 to install the Cabasse StreamCONTROL
application.
2
EASY WI-FI CONNECTION WITH THE CABASSE STREAMCONTROL APP with a smartphone or tablet
wi-fi connected to the domestic network.
a) Install the Cabasse Stream App on an Android or Mac tablet or smartphone from "Play Store" or "App
Store".
b) Switch the STREAM BAR on or press the reset button if already on. Activate the Wi-Fi in the "settings"
application mode of the smartphone or tablet.
c) Launch the Cabasse STREAM CONTROL App and folow the set up instructions.
STREAM BAR is now ready to play all the shared audio files in your network as well as all the web radios
proposed by vTuner.
Do not shut down or unplug STREAM
BAR during updates. They might require
several minutes.
CAUTION! An automatic update of the firmware might
start as soon as STREAM BAR is connected to the Web. The
screen displays "UPDTE" for update until the update is fully
completed.
Do not try to use STREAM BAR during the update, wait until
STREAM BAR has restarted, when the front LED is steady
red. Press to turn the STREAM BAR on and carry on.
1
31