CABASSE STREAM BAR Notice D'installation page 25

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
SETTING UP
1- Place the sound bar of Stream BAR in front of the TV or underneath the TV either on a shelf or
wall mounted thanks to the supplied bracket (instructions on page 28) . All connections achieved,
be sure to align the center of the sound bar with the center of the TV.
2- Place the subwoofer along the same wall as the TV, or along any other wall in the front third of
the room.
3- Connect the Stream BAR with the TV using one of the 3 inputs available on the back panel of the
bar. We recommend the HDMI ARC input for best performance and friendlier use:
- HDMI TV socket: connect this socket to the ARC HDMI output
of the TV. Use a HDMI cable (not included in the packing) with the 1.4
( or higher) specification. This specification should on every TV
turn off the TV speakers automatically and allow to use the TV
remote to control the volume of the Stream BAR.
- HDMI socket: use this input to connect a source to Stream BAR,
such as a cable/satellite box, DVD or Blu-ray Disc™ player, a digital
video recorder.
- OPTICAL IN: use the supplied optical cable to connect it to the
TV Audio OUT . Be sure to remove both the caps on both ends
of the cable. Firmly push the plugs into the connectors until
hearing or feeling a click.
- LINE IN: if the TV is not fitted with an optical output, connect
the RCA analog output of the TV with an RCA-mini-jack cable
(not supplied). If there is no RCA output, use the headphone
output and a Jack-mini-jack cable (not supplied).
TURNING OFF THE TV SPEAKERS
2
Turn on the TV, go to the TV menu and select Audio, Sound, or Speaker Settings. Look for the menu
item that allows you to turn off the TV speakers. If there is no setting for turning the TV speakers
off, adjust the TV volume to its lowest setting. Using a ARC connection turns off the TV speakers
automatically.
3
ENABLING DIGITAL AUDIO OUT
If there is no TV sound when on phase 4, look for the menu item that allows to enable the digital
audio output and select the optical setting.
PLUG & PLAY WITH TV
25

Publicité

Table des Matières
loading

Table des Matières