HOMCOM A90-128 Mode D'emploi page 7

Trouble Shooting
Troubles Solutions
Treads 1. This problem is usually exerted because of long time use. The step
can't be resistance exerting heat will result in slow rotation. If needing the treads
rotated to rotate flexibly again, just wait the oil cylinder to cool down.
smoothly 2. Adjust the rotation button resistance appropriately if the treads
or stop resistance is too big.
rotating 3. Change the oil cylinder if it's damaged.
Harsh Firstly make sure that all the screws and nuts are all tightened. Secondly
voice or add a small amount of lubrication oil to reduce friction and noises.
other Places where friction is frequently happened include branch pipe of foot
noises straps and sprocket area.
given out
when
exercising
Electronic 1. Battery is uninstalled. Uncover the back box cover and install the
meter battery.
doesn't 2. Ineffective contact. A. Ineffective contact of the battery:
show
anything electronic meter is not right. Adjust the distance between the inductor
and the electronic meter until the electronic meter can show normally.
3. The connection line is unplugged. Check the connection line.
4. The step angle is too low. Readjust the treadmill angle.
5. The electronic meter is broken. Change the electronic meter.
B: The distance between the inductor and the