Elcometer 280 Mode D'emploi page 2

R
CONTENTS
1 Working Safely
2 Gauge Overview
3 Box & Kit Contents
4 Using the Gauge
5 Charging the Battery
6 Fitting the Battery Pack
7 Connecting the Signal Return Lead
8 Getting Started
9 Selecting a Voltage
10 Manually Calculating the Test Voltage
11 The Safety Trigger Switch
12 Detecting a Holiday
13 Probe Accessories
14 Menu Structure - Model S
15 Menu Structure - Model T
16 Maintenance & Storage
17 Warranty Statement
18 Technical Specification
19 Legal Notices & Regulatory Information
Hg
Pb
For the avoidance of doubt, please refer to the original English language version.
The Elcometer 280 is available in 2 models. This User Guide is written for the Model T. Where applicable the
Model S is referenced.
Gauge Dimensions (l x w x h): 60 x 17.3 x 19cm (23.6 x 6.8 x 7.5")
Gauge Weight: 3.0kg (6.6lb) including battery pack
Battery Type: Rechargeable lithium ion battery pack
Operating Temperature: 0°C to 50°C (32°F to 120°F)
Relative Humidity: 0 - 80% up to 31°C (87.8°F)
Pulsed DC High Voltage Range: 0.5 - 35kV, user adjustable in 100V steps & 10V below 1000V
High Voltage Accuracy: ±5% or ±50V below 1000V. Maximum voltage may be reduced at extreme altitudes.
A Material Safety Data Sheet for the Elcometer 280 Battery Pack can be downloaded via our Website:
www.elcometer.com/images/stories/MSDS/elcometer_266_280_battery_pack.pdf
© Elcometer Limited 2011 - 2016. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
1
https://manual-hub.com/
www.elcometer.com