AIRFORCE Innova Visio Pro 90 Prescriptions De Montage Et Mode D'emploi page 21

MAINTENANCE
Cleaning
First use
• Use a damp cloth to clean and dry the glass surface before using it for the first time.
• It is recommended to dry the appliance after having cleaned it with a damp cloth, in order to
prevent the build-up of limescale.
Daily cleaning
• Although food spills cannot burn into the glass, we nevertheless recommend you to clean the hob
immediately after use.
• Best for daily cleaning is a damp cloth with a mild cleaning agent.
• Dry with kitchen paper or a dry teacloth.
Stubborn stains
• Stubborn stains can also be removed with a mild cleaning agent such as washing-up liquid.
• Remove watermarks and lime scale with vinegar.
• Metalmarks (caused by sliding pans) can be difficult to remove. Special agents are available.
• Use a glass scraper to remove food spills. Melted plastic and sugar is also best removed with a glass
scraper.
Never use abrasives. They leave scratches in which dirt and lime scale can accumulate. Never use
anything sharp such as steel wool or scourers.
Filters and collect tray
Grease filters
In the display of the extraction unit, 'F' and 'G' will be shown alternately after 30 operating hours of the
extraction unit. The grease filters should now be cleaned.
These must be cleaned once a month (or when the filter saturation indication system indicates
this necessity). Do not use aggressive cleaning agents and preferably clean the filter manually or in
the dishwasher at a low temperature and with a short program. Place the filters with the opening
downwards in the dishwasher so that the water can run out. The cleaning agents used in dishwashers
make the aluminum dull faster. This is normal.
After the cleaning and replacing of the grease filters, reset the memory of the filter saturation indication.
FUNZIONAMENTO OPERATION
21 21
EN I