AIRFORCE Innova Visio Pro 90 Prescriptions De Montage Et Mode D'emploi page 16

I EN
Alarm
Chef Cook function
AVVERTENZE OPERATION
Simultaneously press
•
Simultaneously press
•
which you want to see the remaining time. The zone is identified by the lighting on
• The timer's display will display the remaining time of the selected cooking zone.
Deactivation
When pre-set time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the sensor
2 minutes.
If you want to deactivate the timer prior the end of pre-set time:
• Simultaneously press
Simultaneously press
•
where you want to set the timer. The zone is identified by the lighting on of ;
Press to the value
•
is turned off and the timer is deactived .
•
Timer can be used as alarm also if it is already employed in timer control of one of the
hotplates.
Timer setting
With the hob off:
Press to activate the cooking hob;
•
Simultaneously press
•
. If some cooking zone is active,
left, lights on;
• Simultaneously press
The respective is located between
The timer value is set by pressing
•
It's possible setting the time in minutes and seconds or, in hours and minutes also for
•
the alarm.
Switching the alarm off
When the pre-set time expires a beep is heard which you can either turn off by pressing
or , or leave it to turn off automatically after 2 minutes.
If you want to switch the timer off prior expiry of pre-set time:
• Simultaneously press
Simultaneously press
•
light on;
Press until the value
•
This function gives the possibility to handle the pots like in a restaurant kitchen. The user
can slide over the cooktop with the cookware, and on different positions the cookware
gets different power levels.
Activation
• Press and keys simultaneously.
• Function is active and the power level of each zone is indicated in the 7-segment
display of that zone.
Deactivation
• Press again and
The Chef Cook function comes with preset levels for each cooking zone but the user can
modify them with the slider control of each zone. When the function is deactivated every
power level returns to its pre-set value.
and ;
and as many times as necessary, to select the zone of
or or it switches off automatically after
and ;
and as many times as necessary, to select the zone
.
and to activate the alarm. The timer's display shows
of the first active cooking zone from the
and as many times as necessary to select the alarm.
or ;
or ;
and ;
and as many times as necessary to select the alarm,
. The alarm is deactivated.
keys simultaneously.
35
16