Control Panel And Functions - Klarstein Limelight Mode D'emploi

EN
22

CONTROL PANEL AND FUNCTIONS

low
f a n
1. After connecting to power, indicator light will lit on, all the output close and the
hood will enter standby mode. The indicator light will be off automatically after
reminding if no operation.
2. Power on: Press power button once, its indicator light will lit on, the hood works at
low speed. Indicator light of low speed will be bright. Press power button again to
close it, and its indicator light will be off. All the function operation of the hood will
be closed, the hood enters into standby mode, and run by circle.
The speed buttons and lamp button can work separately and not controlled by
the power button. When a certain function button is pressed, the hood operates at
that function status. Press (Power) button under any status, the cooker hood will be
switched off without any functions.
3. Press lamp button once; lights will be turn on. Indicator light of lamp button and
power button will lit on. Press lamp button again to turn off the lights. Indicator
light of lamp button and power button will be off. And recycle like this.
4. Press the (High) button once, motor runs on high speed, the indicator light of high
button and power button will beam. Press high button again and the motor will
stop. Indicator light of high button and power button will be off,and run by circle.
5. Press the (Mid) button once, motor runs on middle speed, the indicator light of
middle button and power button will beam. Press middle button again and the
motor will stop. Indicator light of middle button and power button will be off,and
run by circle.
6. Press the (low) button once, motor runs on low speed, the indicator light of low
button and power button will beam. Press low button again and the motor will
stop. Indicator light of low button and power button will be off,and run by circle.
7. Low speed, mid speed and high speed cannot work at the same time. When hood
is on high speed, press low speed, it will turn to low speed at once; when it is in low
speed, press middle speed, it will turn to middle speed immediately, and so on.
middle high
s p e e d
lamp power