Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

DESICN
NOTE:
SIGNATURE
DESIGN
FURNITURE,
TO PROPERLY
FOLLOW ASSEMBLY
DRAWING Q'TY
NO
O
B
NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
D
c
in leg } I with holes in correspondingside of headboardpanel. Attach
1. Align dowels
leg to panel by turning Allen bolts (A), lock washers (B) and flat washers (C) into
the holes using the Allen wrench (D) as shown.
2. Tighten all bolts and carefully set the headboard upright.
3. Coverall bolts on top of legs using wood plugs (E) as shown.
O Signature Design Furniture, LLC, November. 2008.
ASSEMBLY
IMPORTANT SAFETY NOTICE: READCAREFULLY B EFORE BEGINNING A SSEMBLY!
* Always use proper
* Follow the assembly
* Carefully
from
which you
USE
SUBSTITUTE
* Periodically check to ensure that all connectors
* Keep the
* Some
assembly
handling
the
breaks.
Never handle
*When assembling products that have electric cords (lamps, light, etc.), always
(I)
make sure the electrical cord is unplugged before assembly and (2) be
careful
not to twist
*When assembling
shelves
in order
*Do not stand
and dinner
*Where assembly
people,
do not attempt
LLC.
DISCLAIMS
ANY LIABILITY
INSTRUCTIONS,
PROPERLY
CHECK TO SEETHAT THE FOLLOWING PARTS AREIN THE 8461-81.82 HARDWARE
DESCRIPTION
6
1 4" x 38mm
BOLT
6
1 4"
LOCK
WASHER
6
1 4" FLAT WASHER
wood
plug
Leg } 1
INSTRUCTION
SHEET
FOR
tools.
steps
in order.
review the
list of parts.
If parts
purchased
the product
PARTS.
instructions
for
future
reference.
may involve
attaching
glass or mirrors,
as severe
large
pieces
of glass
the
electrical
cord
during
shelves
or entertainment
to assemble
upper
shelves—use
on tables,
including
but
tables,
as tables
are not to support
instructions
state
that
by yourself
as there
FOR DAMAGES
OR INJURIES
ASSEMBLE
THE PRODUCT,
OR PROPERLY
NO
DRAWING Q'TY
D
2
E
BACK
VIEW
All Rights
8461-81
Do not
skip any steps.
are missing,
contact
the retailer
to obtain
any missing
parts.
(bolts, screws, etc.) are tight.
glass
or mirrors.
Be very careful
injury
may result
if the glass
or mirrors
by yourself.
assembly.
centers,
do not stand
on lower
a step ladder.
not
limited
to, end tables,
coffee
the
weight
of a person.
the assembly
requires
two or more
is a risk of injury.
WHICH
MAY OCCUR
USE THE PRODUCT.
PACK!
DESCRIPTION
4m
N WRENC
WoodPlu
Leg
Reserved.
I
DO NOT
or mirror
tables,
DUE TO FAILURE
of
2
loading

Sommaire des Matières pour Signature Design by Ashley B461-81

  • Page 1 ASSEMBLY INSTRUCTION SHEET 8461-81 IMPORTANT SAFETY NOTICE: READCAREFULLY B EFORE BEGINNING A SSEMBLY! * Always use proper tools. * Follow the assembly steps in order. Do not skip any steps. * Carefully review the list of parts. If parts are missing, contact the retailer from...
  • Page 2 ASSEMBLY INSTRUCTION SHEET 8461 CHECKTO SEETHATTHE FOLLOWING P ARTS ARE IN THE HARDWARE PACK! DRAWING DESCRIPTION DRAWING DESCRIPTION 1 4" LOCK WASHER ALLEN WRENCH 4 mm 1 4" x 30mm ALLEN BOLT 1 4" FLAT WASHER Hook Cross Slats Queen King Side Rail...
  • Page 3 INSTRUCCION PARA I -AMESA M ODEIO 8461-81 NOTICIA IMPORTANTE DESECURIDAD LEA CUIDADOSAMENTE ANTES D ECOMENZAR A ENSAMBIN * Siempre use las herramientas apropiadas. * Siga los pasos de ensamble en orden. No salte ningun paso. * Revise la lista de partes. Si faltan partes, comuniquese...
  • Page 4 INSTRUCCI ONES DEENSAMBIAJ PARA I A MESA MODELO POR FAVOR ASECüRESE DE QUE LAS SICUIENTES PARTES ESTéN DENTRO DEL PAQUETE DE MATERIALES: Descripci6n Descripci6n Dibujo Cant NO Dibuj Cant Llave in leso de 4 mm Arandelos de Se uridad de 1 4 1 4"...
  • Page 5 D'INSTRUCTI DEMONTAGE POUR 8 461-81 IMPORTWE CONCERNANT II SECURITé: DE COMMENCER LEMONTAGE! * Utilisez toujours les outils adaptés. * Suivez l'ordre des étapes de montage. N'en sautez aucune. * Faites l'inventaire attentif de toutes les Si une ou plusieurs pieces manquent, contactez votre revendeur pour obtenir les pieces en question.
  • Page 6 D'INSTRUCII DEMONTAG POUR -81 VERIFIE QUE TOUTES LES PARTIES SUIVANTES SETROUVENT BIEN DANS PAQUET D'EMBALIACE! SCHEMA DESCRIPTION SCHEMA DESCRIPTION Rondelle Frein 1 4" Allen 4 mm Boulon Allen 1 4" x 30mm Rondelle Plate 1 4" Hook Support de Matelas Queen King Patte...

Ce manuel est également adapté pour:

B461-82B461-94B461-96B461-97