Signature Design by Ashley B397-57P Instructions De Montage

ASSEMBLY
DESIGN
A PHLLPS HEO
SCREWDRTVER IS
NEEDED FOR
ASSEUBLY
INCLUDED*
(4)
PLEASE TAKE TIME TO READ ALL INSTRUCTIONS AND WARNINGS BEFORE BEGINNING ASSEMBLY!
SAFETY WARNINGS:
- REPLACEMEN T PARTS,INCLUDING ADDITIONAL GUARDRAILS, MAYBE OBTAINED FROMANY OF OUR ASHLEYFURNITURE DEALERS.
- DO NOT ALLOW CHILDREN UNDER SIX YEARS OF AGE TO USE THE UPPER BUNK.
- ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER BUNK.
- PROHIBIT HORSEPLAY ON OR UNDER BEDS.
- PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.
- USE LADDER FOR ENTERING OR LEAVING UPPE
- ALWAYS USE THE RECOMMENDED
- SURFAC E OFMATTRES S MUST B EATLEAST F IVE INCHES ( 127mm)BELOW THEUPPER EDGE OFGUARDRAILS.
- PERIODICALL Y CHECKAND ENSURE THATTHE GUARDRAIL, LADDER, A ND OTHERCOMPONENTS ARE IN THEIRPROPER POSITION, FREE FROMDAMAGE, AND THATALL
CONNECTORS ARE TIGHT.
- DO NOT USE SUBSTITUTEPARTS. CONTACTTHE MANUFACTURER OR DEALER FOR REPLACEMENT PARTS.
- USE OF A NIGHT LIGHT MAY PROVIDEADDED SAFETY PRECAUTIONFOR A CHILD USING THE UPPER BUNK.
- THE USE OF WATEROR SLEEP FLOTATIONMATTRESSES IS PROHIBITED.
STRANGULATIO N HAZARD - NEVER ATTACH OR HANCITEMSTO ANY PARTOF THE BUNK BEDTHATARE NOT DESIGNED FOR USE WITHTHE BED; FOR OWLE,
NOT LIMITED TO, HOOKS,BELTSAND JUMP ROPES.
- KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
- PROHIBIT JUMPING ON BEDS.
SIZE OF MATTRESS:
THE ONLY ACCEPTABLESIZE MATTRESSTO BE USED WITH THIS BED IS AS FOLLOWS:
- THEMATTRE SS MUST BEBETWEEN
- THEMATTRE SS MUST BEBETWEEN
- THEMATTRE SS PLUS FOUNDATIO N
NOTICE.
UNIT MAY BE ASSEMBLED AS BUNK BEDS OR
TWO TWIN BEDS. SEE INSTRUCTIONS FOR DETAILS.
Signature Design Furniture does not assume liability
for damage or injury which may occur due to
improper assemblyor abusive use of this product.
EEP AL INSTRUCTIONS
O Sianature Desian Furniture
INSTRUCTION SHEET FOR
* Alwaysuse proper tools.
* Followthe assemblysteps in order. Do not skip any steps.
* Carefullyreviewthe list of parts. If parts are missing,contact the retailer from whichyou purchasedthe
product to obtain any missingparts. DO NOTUSESUBSTITUTE
* Periodically c heckto ensurethat all connectors ( bolts,screws, e tc.) ore tight.
* Keepthe instructionsfor future reference.
* Some assemblymay involveattachinggloss or mirrors. Be very careful handlingthe glass or mirrors, as
severeinjury may result if the glass or mirror breaks. Neverhandlelarge pieces of glass or mirrors by
yourself.
*When assembling p roducts thot hoveelectriccords(lamps,light, etc.), always (1) mokesurethe electrical
cordis unplugged b eforeassembly a nd(2) be carefulnot to twist the electrical c ordduringassembly.
*Whenassembling shelvesor entertainmentcenters,do not stand on lowershelvesin order to assemble
upper shelves—use a step ladder.
*Do not stand on tables, includingbut not limited to, end tables, coffee tables, and dinner tables, as tables
are not to support the weightof a person.
*Whereassemblyinstructionsstate that the assemblyrequirestwo or more people,do not attempt by
yourself as there is a risk of injury.
NOTE: S ignatureDesign,LLC.disclaimsany liability for damagesor injurieswhich may occur due to
failure to properlyfollow assemblyinstructions,properlyassemblethe product, or properlyuse the
product.
UNIT SHOULD BE ASSEMBLED BY TWO OR MORE ADULTS. ALLOW 30 TO 45 MINUTES FOR ASSEMBLY
IF ANY OF THESE PARTS IS MISSING,OR IF YOU REQUIREREPLACEMENT PARTS, INCLUDING
ADDITIONAL GUARDRAILS, P LEASECONTACTANY OF OUR ASHLEY DEALERSOR CALL 1-800-477-2222.
HARDWARE PACK
NO DRAWING QTY DESCRIPTION
24 M8 x
24
LOCK
c 24 FLAT WASHER
2 SCREW
PARTS LIST
Upper Headboard
Upper Footboard
Lower Headboard
Lower Footboard
Side rail
SIZE MATTRESS O R MATTRESS S UPPORT, O R BOTH,TO HELPPREVENT THE LIKELIHOOD O F ENTRAPMENT OR FALLS.
37 1/2" (952mm)and38 1/2" (978mm)WIDE.
74 (1880mm) and75 (1905mm) LONG.
MUST B ENOTHICKER THAN 7" (178mm).
INCLUDED WITH
LLC.
B397-57P/57R/57S
IMPORTANT SAFETYNOTICE:READ CAREFULLY BEFOREBEGINNING ASSEMBLY!
NO DRAWING
82mm
WASHER
M4 x 16mm
(2)
Guard
Loft desk
Mattress support for top (14 slats)
Mattress support for bottom (14 slats)
(1)
Ladder
Loft desk
YOUR
Jun 201 1
PARTS.
QTY DESCRIPTION
M4 ALLEN WRENCH
24 BARREL NUT
56 SCREW M4 x
Ø19 x 152mm
4
rail
left
with drawers
REMOVE WARNING LABEL FROM BED.
WARNING LABEL/MODEL/MFG./DATA
DO NOT REMOVE!
Riahts
25mm
BUT
LABEL
of 5