Hisense RB17N6AWE/L Mode D'emploi page 6

5
w
D ZIOO'T*n
1450
Relevant information
Dimension
Imm W
Model
680
RB14N6ASE
RB17N6AWE RB17N6AWE
RB17N6ASE
790
RB17N6ASE/L
RB17N6ASE/L
RB17N6AWE/L 7N6AWEIL
Dimension
w
Model
26 8
RB14N6ASE
RB17N6AWE
RB17N6AWE
RBI 7N6ASE
RB17N6ASE/L RB17N6ASE/L
RB17N6AWE/L RB17N6AWE/L
Note:
This appliance performs well with
ambient temperature
12.80C to 43.30C -The Appliance may
not work properly if it is left for a long
period at a temperature
below the indicated
• Install your appliance in a dry place
and avoid high moisture
as basement, garages
• Keep the appliance
sunlight, rain or frost. Install the
appliance away from
such as stoves, fires or heaters.
Leveling of appliance
The appliance should be levelled in
order to eliminate vibration.
unit, please complete
steps.
1. Roll the refrigerator
2. Turn the adjustable feet (with your
fingers or a suitable spanner) until it
touches the floor.
(4")
> 100mm
w,
w,
525 600 1315
610 600 1425
20 7 23 6 51 8
24.0 23 6 561
between
above or
range.
areas such
etc..
out of direct
heat sources
To level the
the following
into place.
Hisense
3. Tilt back the top backwards
10-15 mm (0.3-0.4")
1-2 turn further. This will allow
to selfclose, providing
closed seal.
4. Whenever you
appliance, remember
back up so that the appliance
freely. Reinstall the
relocating.
Caution! The rollers,
castors, should be only used for forward
or backward movement.
refrigerator sideways may damage your
floor and the rollers.
Front roller
Ad' ustable foot
After the installation
After you have successfully
appliance, you should clean it thoroughly
before using. Cleaning details can be found
in the "Cleaning and care" chapter.
for about
by turning the feet
the doors
a consistent
want to move the
to turn the feet
can roll
appliance when
which are not
Moving the
10-15 mm
(0.3-0.4")
installed the