KLEIN+HUMMEL CDP3 Mode D'emploi page 3

Mains Connection:
This unit is designed for continuous operation.
•
Ensure that the operating voltage of the unit matches that of the local mains current (AC line voltage).
•
Always check before connecting the power cable to the mains socket that the power switch on the unit itself is set to off ("O").
•
Use the power cable or power supply that came with the unit to connect to the mains socket (wall outlet).
•
Power supply: a damaged power cable may not be repaired. Use a new cable.
•
Avoid plugging the mains cable into a power strip that already has several other power-consuming devices connected to it.
•
Avoid using extension cables. The unit must be connected to a mains socket close to it, and that socket should be freely accessible.
•
Installation:
Do not expose this product to vibration.
•
Do not operate this product anywhere near water or other liquids. Do not use it near a sink, swimming pool, bathtub, or in any damp room or area.
•
Electrical shocks carried through water can kill. Do not place any beverages whatsoever on or near this product, as liquids can kill electronic
components.
Keep this product a safe distance away from radiators and other heaters of any kind.
•
If you bring this product from a cold environment into a warm one, it is quite possible that condensation will form inside the cabinet. Please allow
•
the unit sufficient time for acclimation to room temperature (minimum thirty minutes) before connecting and powering up.
To avoid accidents, do not use any accessory equipment with this product that is not approved by the manufacturer, particularly mounting
•
accessories.
Operating Manual CDP3
3 of 40
Page Version 03