Timer - SCHOCK STIB64BKM Notice D'utilisation

•
Power management:
The cooking hob is equipped with two booster functions. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 3 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Zone selection
Select « Timer »
Deactivate the units
Valid the units
Deactivate the tens
Valid the tens
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
•
Egg timer function :
Example for 29 minutes :
Action
Activate the hob
Select« Timer »
Set the units
Valid the units
Set the tens
Valid the tens
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.
The other heating zone:
[ 9 ] goes to [ 7 ] depending the type of zone
Control panel
press display [ 0 ] selected
slide on the "SLIDER" to [ 7 ]
press display [ CL ]
slide on the "SLIDER" to [ 6 ]
press display [ 06 ]
slide on the "SLIDER" to [ 1 ]
press display [ 16 ]
Control panel
press display [ 0 ] selected
press key [ 13 ]
slide on the "SLIDER" to [ 0 ]
press display [ 10 ]
slide on the "SLIDER" to [ 0 ]
press display [ 00 ]
Control panel
press display [ ]
press display [ CL ]
slide on the "SLIDER" to [ 9 ]
press display [ 09 ]
slide on the "SLIDER" to [ 2 ]
press display [ 29 ]
10
(example: power level 9)
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]
Display
[ 0 ] and control light on
[ 13 ]
[ 1 fixed ] [ 0 blinking ]
[ 1 blinking ] [ 0 fixed ]
[ 0 blinking ] [ 0 fixed ]
[ 00 ]
Display
zone control lights are on
[ 00 ]
[ 0 fixed ] [ 9 blinking ]
[ 0 blinking ] [ 9 fixed ]
[ 2 blinking ] [ 9 fixed ]
[ 29 ]