How To Remote Wipe Your Lost/Stolen Datashur Bt; How To Add Additional Drives To Your Existing Datashur Bt Personal App - iStorage datashur BT Manuel D'utilisation

Masquer les pouces Voir aussi pour datashur BT:

Table des Matières

Les langues disponibles

21. How to Remote Wipe your lost/stolen datAshur BT

Remote wipe is an additional security feature that allows a datAshur BT owner to send a command that deletes the encryption

key, all data and credentials on a drive that has been lost or stolen. Once Remote Wipe has been activated, your datAshur BT

will reset, thereby deleting all data and credentials from the drive the next time it is connected to a computer by you or anyone

else.

Remote Wipe will only work if previously enabled as described in Section 20, 'How to enable Remote Wipe'. To Remote Wipe

your datAshur BT, proceed with the following steps.

Warning:

Once Remote Wipe has been activated, this action CANNOT be undone. If you proceed it will permanently delete

all data and credentials from your drive.

How to Remote Wipe

1. Open your datAshur BT Personal App and make a note

of the serial number displayed beneath the drive

name.

2. Swipe the drive name 'datAshur BT' to the right and

then tap on Wipe.

3. Enter the Serial Number of the drive and then tap

Remote Wipe.

4. On the Remote Wipe Activated screen, tap OK.

The next time your datAshur BT is connected to a computer, the drive will reset causing all data and credentials to be

deleted and lost forever.

You can add and authenticate multiple drives on the existing App. For instance, if you have two datAshur BT drives, you will

only need to use one App.

To add additional drives, proceed with the following steps.

#16

www.istorage-uk.com

App

Table des Matières

Table des Matières