Schwaiger DAB 650 Mode D'emploi Et Consignes De Sécurité page 49

Programme Type
This describes the „style" or „genre" of the programme that is being broadcast.
Ensemble Name/Frequency
This display the name of the multiplex that contains the station you are listening
to and the frequency. A multiplex is a collection of radio stations that are bundled
and transmitted on one frequency. There are national and local multiplexes. Local
ones contain stations that are specific to that area.
Signal Error/ Signal Strength
The error is shown as a number. If the number is 0, it means the signal received
is error free and the signal strength is strong. If the error rate is high, it is recom-
mended to reposition the radio aerial or reposition the unit. The display will show
a slide bar to indicate the signal strength, the stronger the signal, the longer the
bar will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate being received with additional infor-
mation about the audio codec and channel configuration.
Date
This displays the current date provided automatically by the broadcaster.
Inactive channels
You may remove all unavailable stations from the list.
1. During DAB mode, press the MENU button and press the
to select Inactive channels, press SELECT button to confirm.
2. Press the
confirm. Or select NO to cancel.
DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy environment, you
may wish to compress the audio dynamic range.
1. During DAB mode, press the MENU button and press the
to select DRC, press the SELECT button to confirm.
2. Press the
SELECT button to confirm the setting.
/ buttons to select YES and press the SELECT button to
buttons to select DRC high/low/off and press the
/ /
USER GUIDE
49
/ / buttons
/ / buttons