Schwaiger DAB 650 Mode D'emploi Et Consignes De Sécurité page 39

Date/Time 12/24 hour
format
Auto Update
Set timezone
Daylight savings
Network settings
3. The display will show "Network wizard scanning....". Your radio will now scan
for your wireless network, this may take a few seconds then a list of all the
wireless networks will appear on the screen. Press the
buttons on the unit or press
your wireless network, then press VOLUME/ SELECT/SNOOZE dial on unit
or SELECT button on remote control to confirm.
4. Press the
on remote control to select Push Button/Pin/Skip WPS, then press VOLUME/
SELECT/SNOOZE dial on unit or SELECT button on remote control to con-
firm.
Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a
quick and easy way to connect your radio without having to type in a pass-
word.
If your router has a WPS button you will notice [WPS] at the front of your net-
work name.
5. Press the
tons on remote control to select Push Button, then press VOLUME/SELECT/
SNOOZE dial on unit or SELECT button on remote control to confirm.
6. You will now see a message on the screen telling you to press the WPS button
on your router. Press the WPS button on your router. Check your routers inst-
ruction manual if you are unsure which button is the WPS button.
7. Press the VOLUME/SELECT/SNOOZE dial on unit or SELECT button on re-
mote control to confirm. Your radio will now connect to your router, this may
take a few seconds.
/ / buttons on the unit or press
/
/ / buttons on the unit or press
/
USER GUIDE
Set 12 hours or 24 hours display
Choose how you want the time to
be automatically updated.
Update from DAB/ Update from
FM/ Update from Network/ No update
Select a time zone. (Only available when
Auto update from Network is on.)
Select daylight savings. (Only available
when Auto update from Network is on.)
Choose whether keep network connected.
Yes/ No
/ / buttons on remote control to select
39
/ /
/
/ / buttons
/ / but-