Schwaiger DAB 650 Mode D'emploi Et Consignes De Sécurité page 42

USER GUIDE
Network
1. During System Settings mode, press the
and press the SELECT button to confirm.
2. Press the /
press the SELECT button to confirm.
Network wizard
PBC Wlan setup
View settings
Manual settings
NetRemote
PIN Setup
Network profile
Clear network
settings
Keep network
connected
3. Press the BACK button on unit or remote control to return back to the previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the Inter-
net, DAB or FM radio station with time/date information. You may also adjust the
Time/Date manually.
• Press the CLOCK button to access Set Time/Date.
Alternatively,
• During System settings mode, press the
Date and press the SELECT button to confirm. Press the
select Set Time/Date and press the SELECT button to confirm.
1. The date digits will flash on the display.
2. Press the /
button to confirm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
/ buttons to select from the following settings, and then
SSID – select the desire wireless network. Rescan – Scan
for available networks. Manual config – select wireless
network with DHCP enable/disable.
Press the WPS button on the modem device that you wish to
connect with. Then press the VOLUME/SELECT/SNOOZE
dial on unit or SELECT button on remote control to continue.
Display the setting on the unit.
Select DHCP enable/disable.
To define a PIN number to be entered before being able to
connect to the unit remotely over a network
View the connected network.
To delete the connected network memory in Network
profile.
To define whether remains connected to its network in
Standby mode and when not in Network radio mode.
buttons to adjust the day and then press the SELECT
/
/ /
/ /
42
buttons to select Network
buttons to select Time/
/ / buttons to