Special Safety Instructions - Gardeo GTHE510SP Traduction Des Instructions D'origine

Additional safety warnings
OPERATION
• Do not overload the equipment Ensure that you use the right power tool for the job If you use
the appropriate power tool it will be easier for you to work within the specified power range.
- and it will also increase safety
• Never use the power tool if the switch is faulty Any power tool that cannot be started or switched
off is dangerous and must be repaired.
• Pull the plug out from the socket or take out the battery before you replace accessories, adjust or
put the equipment away That way you will prevent the power tool from starting accidentally
• Always store the power tool in a place that is inaccessible to children when you are not using it
Do not let others use the equipment if they are not experienced users, or if they have not read
through the instructions Power tools are dangerous if they are used by inexperienced users
• Take good care of the power too Check that all moving parts are in working order and can move
freely Also check that no parts are faulty or damaged to a point that the power tool cannot
function as it should Repair all damaged parts before you use the power tool Many accidents
with power tools are due to poor maintenance
• Keep the blades sharp and clean Properly maintained blades do not get stuck as often and are
easier to use
• Always use the power tool and all accessories, tools etc in accordance with the instructions Also
think about your working conditions and the work you are going to carry out If you use the
power tool for work for which it is not intended, this can lead to dangerous situations
• The power tool can only be repaired by qualified personnel Only original spare parts may be
used That way safety is maintained

SPECIAL SAFETY INSTRUCTIONS

• Ensure that no body parts come into contact with the blades. Never attempt to remove cuttings
or hold on to any material which you intend to cut while the blades are moving. You should only
remove cuttings which have become stuck when the equipment is switched off. It only takes a
moment's carelessness to end up with severe injuries when using the hedge cutter
• Carry the hedge cutter using the handle when the blades are still Always use the guard when
transporting or storing the hedge cutter You reduce the risk of injuring yourself if you are careful
when handling the equipment
• Always hold onto the insulated gripping surfaces, as the cutting blades can come into contact
with hidden wiring or its own power cable. If the cutting blades come into contact with a live
cable, the equipment's metal parts can become live and give electric shocks.
• Ensure you hold the cable away from the area you are cutting. There is a risk of cutting the cable
if it becomes hidden by the bushes.
53