Cleaning And Maintenance; Safety Advice - Bartscher KV 270L Mode D'emploi

The LED defrosting indicator
is finished. After defrosting the LED defrosting indicator
defrosting will start after 6 hours.
•
In case of planned break in the device operation turn it off with use of ON/OFF
switch and disconnect from the power supply (remove the plug from the socket!).
Tips for the user
•
To minimize loss of cold, keep the sliding doors open for as short of a time as
possible. Moreover do not open the slide doors too often.
•
Do not cover the air inlet and outlet holes in the device. Air must circulate freely in
order to assure appropriate cooling properties.
•
The stored food should be placed in appropriate distances from each other.
Too little distances reduce the cooling effect.
•
Adapt the distances between the shelves to the height of stored products.
•
Warm food should be cooled to the room temperature before storing.
•
Do not place the stored food (e.g. cakes, snacks) directly on the shelves, but always
on appropriate plates or trays.
•
In the event of a power failure, avoid opening doors if possible in order to avoid
cold loss.
•
After a power outage or after removing the plug from its socket do not connect
the device to a power source for at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
will come on and will blink until the defrosting process
comes off and the next
- 29 -