Bartscher KV 270L Mode D'emploi page 29

Start-up
•
Start the device with use of ON/OFF switch on the control panel. The red light,
integrated with the switch, will come on.
•
The digital display will show the preset temperature value and the LED cooling
indicator will come on.
•
The device should reach the preset temperature before placing the food
products inside.
Setting of required temperature (required value)
•
The operating temperature in the device is in range 2 ° C to 8 ° C.
•
Setting of changing of required value:
press button, the set value flashes;
increase or decrease the value with
confirm the value entered by pressing the button
•
If no button is pressed during the next 10 seconds, the digital display will show
the temperature inside the device.
Turning on/off of LED lighting
•
The device is equipped with 2 illumination LED strips (in the upper part).
•
The LED illumination may be turned on as required by pressing
•
In order to turn the lighting off
Defrosting
Automatic defrosting
The device automatically defrosts 4 times per 24 hours.
Manual defrosting
When it is required to defrost at other time, press and hold
than 6 seconds.
- 28 -
or button as required;
button must be pressed again.
.
button.
button longer