Valueline SVL-CARCAM11 Mode D'emploi page 4

SVL-CARCAM11
Car DVR
Description
The car DVR is a device that is mounted to the windscreen of your
vehicle in order to take photos, record videos and play back photos
and videos.
1. Display
2. On/off button
3. Mode button
4. OK button
5. Menu button
6. Up button
7. Down button
8. Lens
9. Infrared light
10. Mini-USB connection
11. Memory card slot (microSD / TransFlash)
12. Speaker and Microphone
13. Reset button
14. Windscreen mount
15. Lock button
Buttons
• Press and hold the button for 3 seconds to switch on the device.
Press and hold the button for 3 seconds again to switch off the
On/off device.
• Photo mode / Video mode: Press the button to switch on or off
the infrared light.
• Press the button to select photo mode, video mode or playback
Mode
mode.
• Menu mode: Press the button to confirm selection.
• Photo mode: Press the button to take photos.
OK • Video mode: Press the button to record videos. Press the button
again to stop recording videos.
• Playback mode: Press the button to play and pause videos.
• Photo mode / Video mode: Press the button to access or exit the
menu mode. Press the button again to access the setup menu.
Menu • Playback mode: Press the button to delete or protect files.
• Menu mode: Press the button to go back one step in the current
menu.
• Menu mode: Press the button to move up in the menu.
• Video mode: Press the button to switch on or off the
Up
microphone.
• Playback mode: Press the button to go to the previous file.
• Menu mode: Press the button to move down in the menu.
Down • Video mode: Press the button to switch on or off the display.
• Playback mode: Press the button to go to the next file.
• Video mode: Press the button to lock the current video while
Lock
recording.
Use
1. Insert a memory card into the memory card slot.
2. Power the device using the mini-USB connector and car charger.
3. The device starts recording videos automatically and the red
circle in the top left corner starts flashing.
4. If the device does not start recording videos automatically,
make sure that the device is set to video mode. Press the OK
button.
Video mode
Resolution
Time stamp
Motion Detection
Video time (loop)
Voice recording
Exposure
Photo mode
Size
Exposure
Playback mode
Delete
Lock
Setup menu
Format
Language
Auto Power Off
LCD Off
System Reset
Frequency
Date/Time
LED
USB
Version
Reset button
To reset the device, use a small needle or a paper clip to press and
hold the reset button for 3 seconds.
4
1280 x 720 / 640 x 480
Off / On
Off / On
Off / 1 min / 3 min / 5 min
Off / On
-2.0 to +2.0
3 MP / 2 MP / 1.3 MP / VGA
-2.0 to +2.0
Delete One / Delete All
Lock One / Lock All / Unlock One / Unlock All
Format the SD card (recommended before first use)
Set the preferred language
Off / 1 min / 2 min / 3 min
Off / 3 min / 2 min / 3 min
Cancel / Execute
50 Hz / 60 Hz
Set the current date and time
Off / On
PC Cam / Disk Drive
Software version