Introduction / Scope Of Supply - BEHA Unitest 93539 Mode D'emploi

References marked on instrument or in instruction manual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMC Directive
(89/336/EEC), Standards EN 50081-1and EN 50082-1
are fulfilled. It also complies with the Low Voltage Di-
rective (73/23/EEC), Standard EN 61010-1 is fulfilled.
Warning of potential danger caused by accumulators
and batteries.
Caution! Application around and removal from
HAZARDOUS LIVE conductors is permitted.
Continuous double or reinforced insulation complies
with category II, IEC 60536.
The instruction manual contains information and refer-
ences, necessary for safe operation and maintenance of
the instrument. Prior to using the instrument (commis-
sioning / assembly) the user is kindly requested to thor-
oughly read the instruction manual and comply with it
in all sections.
Failure to read the instruction manual or to comply with
the warnings and references contained herein can result
in serious bodily injury or instrument damage.
The scope of supply comprises:
1 pc. UNITEST current clamp 93539
2 pce. test leads with probes (red/black)
2 pce. battery 1,5 V IEC LR03
1 pce. carrying case
1 pce. instruction manual
Further accessories, such as test leads, probes, connec-
tors, etc., are listed in the UNITEST catalogue.

Introduction / Scope of supply

19