Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING! Read and understand all instructions before using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.
SAFETY
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a possibility
of property damage, injury or death if certain instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will result in severe personal injury or
death if the proper precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal injury or
death if the proper precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result in minor or moderate injury
if proper precautions are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or property damage,
but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the work area.
3.
Store unused tools properly in a safe and dry location to prevent rust or damage. Lock tools away and keep
out of the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Wear protective clothing designed for the work environment and tool.
2.
Non-skid footwear is recommended to maintain footing and balance in the work environment.
3.
Wear steel toe footwear or steel toe caps to prevent a foot injury from falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the moving parts of a tool. Keep long hair
covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance enables better control in unexpected
situations.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Rugged Tread Steel Ramps
SR611D SR611B
User Manual
T: 00352/26908036 – F: 00352/26908040
SR611D
SR611B
Publicité
Table des Matières
