Ce-Statement - EUROMAC Tower EUROM StH2000T Manuel D'utilisation


Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

Open the back, remove the filter (illustration with Description) and beat it clean or rinse
it carefully. Allow it to dry very thoroughly before putting it back!

Using a vacuum cleaner, carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage any
internal parts during cleaning!

The heater contains no other parts which need maintenance.

Place the filter in the correct position and close the back again.

At the end of the season, store the cleaned heater in the original packaging if necessary.
Store it upright in a cool, dry and dust-free place.
Do not dispose of heater with household waste when it becomes worn or
damaged beyond repair. Take it to your local authority's collection point for
electrical appliances where any reusable materials will be collected and
redistributed.

CE-statement

Euromac bv., Genemuiden-NL hereby declares that the EUROM fan heater with PTC-
elements, type StH2000T, complies with the LVD guideline 2006/95/EC and the EMC
guideline 2004/108/EC and meets the following standards:
EN 60335-1:2002+A1+A11+A12+A2+A13
EN 60335-2-30:2009
EN 62233:2008
Genemuiden, 27-05-2013
W.J. Bakker
EN 55014-1 :2006+A1
EN 55014-2 :1997+A1+A2
EN 61000-3-2 :2006+A1+A2
EN 61000-3-3 :2008
18