Table des Matières
Publicité
disconnect:
delay 2
send "+++"
delay 2
send "ATH0T\r"
ignore "0\r" or "OK\r" timeout 2
send "ATE0Q1\r"
ignore "0\r" timeout 1
done
condin:
send "ATZ0Q0T\r"
ignore "0\r" or "OK\r\n" timeout 2
send "ATE0T\r"
expect "0\r" or "OK\r\n" timeout 2
send "ATQ0V0X0T\r"
expect "0\r" timeout 2
send "ATS0=2\r"
expect "0\r" timeout 2
done
waitcall: ignore "2\r" timeout 1
expect "2\r" timeout 10
expect "16\r" or "15\r" or "14\r" or "12\r" or "10\r" or "5\r" or "1\r"
timeout 60
done
page:
send "ATDT%N,,,,%R;\r"
expect "0\r" timeout 60
delay 2
send "ATH0T\r"
expect "0\r" timeout 2
done
ripo:
send "ATZ0Q0T\r"
ignore "0\r" or "OK\r\n" timeout 2
send "ATE0T\r"
expect "0\r" or "OK\r\n" timeout 2
send "ATQ0V0X0T\r"
expect "0\r" timeout 2
send "ATS0=0\r"
expect "0\r" timeout 2
done
error:
expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r"
delay 2
done
# Separate from previous data.
# Assure command mode.
# Allow mode switching delay.
# Set modem switch–hook down
#
(i.e., hang up).
# Ignore modem response.
# Initialize modem: Echo OFF,
#
Disable responses.
# Reset modem. Select profile 0
# Ignore modem response.
# Initialize modem: Echo OFF,
#
Enable responses (Numeric),
#
Limit response codes.
# Confirm commands successful.
# Set AutoAnswer ON
# Confirm command successful.
# Ignore first ring.
# Pick up second ring
#
or timeout.
# Expect a connection response.
# %N = pager call center number
# Add enough commas to wait for
#
time to enter paging number.
# %R = paging number
# Confirm successful command.
# Wait before hanging up.
# Hang up.
# Confirm successful command.
# Reset modem. Select profile 0
# Ignore modem response.
# Initialize modem: Echo OFF,
#
Enable responses (Numeric),
#
Limit response codes.
# Confirm commands successful.
# Set AutoAnswer OFF
# Confirm command successful.
# RI Power On enabled.
# Handle unexpected modem
#
responses.
Configurations des modems
C-15
Publicité
Table des Matières
