Cleaning And Maintenance; Replacement Parts - CASCO FX70 Mode D'emploi

Store your eyewear at temperatures not over +50° C. The product life of CASCO
goggles/SNOW masks depends on the conditions and very much on the amount
of use and level of maintenance shown by the user.

Cleaning and Maintenance

The inner side of the lens has been treated with an anti-fog coating. This coating
is very sensitive to damage while wet and therefore may only be cleaned when
dry with a clean, soft cloth!
The outer part of the lenses as well as the goggle/SNOWmask frame can be put
under the tap for cleaning and then dried with a clean, soft cloth.
CAUTION: Do not ever use chemical cleaning agents or treat
with sprays!
UV Protection
CASCO lenses absorb up to 100% of eye-damaging UV-A, B, and C rays.
UV-C
( - 290 nm )
UV-B
( - 315 nm )
UV-A
( - 400 nm )
Light Transmission
The shade number (protection level) has been stated on the goggle case label.
It indicates the level of protection with defi ned fi ltering characteristics and
describes the possible application. Filter (shade number) categories after EN 174,
Table 2:
Filter Tint
0 Colourless or
light
1 Light
2 Medium
3 Strong
4 Very dark

Replacement parts

Please consult your CASCO dealer for replacement parts.
is absorbed by the earth's ozone layer and our filters
causes the skin to tan or burn and can cause
conjunctivitis and even snowblindness
effects a mild tanning of the skin and can lead to
cataracts when the eyes have been exposed to its
rays over many years
Application
Light filter for a bit of sun
Light filter for some sun
Universal filter, general application
For intense sunlight
For intense sunlight on snow, sand
and water surfaces, in the mountains
and in the tropics.