Volume Adjustment; Bluetooth Operation - Trevi XR 8A15 Manuel Utilisateur

Haut-parleur avec radio et bluetooth
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- Micro SD mode, if present a micro SD type memory in the slot (5) it will start playback of
the music automatically.
- Radio Mode.
- AUX IN Mode.

VOLUME ADJUSTMENT

Press and hold the Volume - (4), Volume + (3) to adjust the volume.
OPERATION AUX IN
1. Turn On the speaker;
2. Connect a 3.5mm Jack cable to socket (6) and the other end to the external device;
3. Start playback from the external device.
OPERATION MICRO SD CARD
1. Insert a Micro SD card into the slot (5) holding the electrical contacts facing upwards;
2. Turn On the speaker;
3. Playback will start automatically;
4. Press once the - (4) button to skip to the previous track, press the + button (3) to
skip to the next track;
5. Press
(2) button to pause playback, press again to resume playback.

BLUETOOTH OPERATION

PAIRING DEVICES
1. Long pressing
2. The speaker will be default into Bluetooth mode when first turned on;
3. Follow the instructions of your device to search the speaker;
4. Turn on the Bluetooth setting of your device and search the pairing name "XR 8A15" and
enter the PIN "0000" if required;
5. Music is ready to play after paired;
6. During the play, press - (4) or + (3) for previous or next song, keep pressing - (4) or +
(3) can increase or reduce the volume;
7. Pressing twice
Notes:
- The Bluetooth speaker only works with a connection at a time, the connection can not be
interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth device in
the list of connections, restart the Bluetooth speaker and search for the signal again.
TWS OPERATION
1. Turn on two XR 8A15 units and make sure without connecting other devices, keep
pressing
(2) to TWS mode, then the two units will be paired, there is tone after paired
successful;
2. Using your device to search the pairing name "XR 8A15", music is ready to play for the
two units together after paired.
button (1) to turn on the speaker;
(2) button to disconnect Bluetooth connection.

Publicité

Table des Matières
loading

Table des Matières