Plum GUIDE RENTAL Mode D'emploi page 35

- SKI POSITION
It is mandatory to release ski stopper to go back in "ski" position
For that purpose, please apply the following manipulations:
1- Move the cursor towards
Make the cursor slide towards to release the shim.
It is possible to realize this action with the hand or with your ski pole
extremity.
2- Turn the heel-piece in "SKI" Position
In SKI Mode, the heelpiece is rotated in order to have the pins facing towards
the front of the ski. These pins are the ones into which the boot steps.
In such a position, the toe piece must be in SKI Mode.
User Manual
16 | P a g e