Bindings must be dry, clean and with grease. Close the toe lever (3) and
decrease release value of the heel piece.
FRONT PART USING INSTRUCTIONS
The GUIDE RENTAL bindings have a locker on each front part.
This locker can have two positions: WALK mode and SKI mode.
When you step-in the binding, the SKI mode is automatically
-
SKI Mode (downhill):
To switch the locker into ski mode, push the black locker forward until it
reaches an almost horizontal position. The word « SKI » is now visible on the
lever.
The SKI mode means the clamp system of the toe piece is in release position
and the black locker in low position.. Hence, in such a position, the binding
retains a release capacity. This SKI mode position must be kept during all
descents. Moreover, in such a situation, the boot must be latched into the
heelpiece.
10 |
P a g e
User Manual