Lorell 84167 Manuel D'instructions

Instruction Manual
PARTS
Phillips Screws
(for tray)
Wall Brackets
Drywall Anchors
Phillips Screws
(for bracket)
Phillips Head Tip
Position Pen Tray at desired location along board rail.
1.
2. Place screws into board rail where the pre-drilled
are on the pen tray. Tighten with phillips head tip.
3. Check results. If not satisfied, start over from the beginning
Punch or drill holes in wall that are no larger than 1/4"in
1.
diameter. Insert anchors into holes so that they are set
firmly into wall. Attach bracket into anchors with screws.
Do not over tighten.
2. Place back of frame over top of wall braket so that wall
bracket slips between back of board and metal frame.
Center board on brackets.
PARTS & QUANTITY
LLR84167
3pcs
2pcs
4pcs
4pcs
Ipc
SECURING PEN TRAY
holes
MOUNTING INSTRUCTIONS
Manufactured in China for S.P. Richards Co., Atlanta, GA
Dry-Erase Board With Wood Frame
LLR84168 LLR84169
4pcs 5pcs
2pcs 4pcs
4pcs 8pcs
4pcs 8pcs
Ipc Ipc
TO BOARD FRAME
Wall
Bracket
Screw
Frame
Board
84167/84168/84169/84170
LLR84170
5pcs
4pcs
8pcs
8pcs
Ipc
FRONT of Board
Slide To Center
Of Pen Tray
Drywall
Anchor
Horizontal
Vertical
pen Tray