Télécharger
Partager
Imprimer la page
  1. Manuels
  2. Marques
  3. Digi Manuels
  4. Adaptateurs
  5. XBee RR
  6. Mode d'emploi

Compatibility With Other Xbee Devices; Leds - Digi Xbee Rr Mode D'emploi

Masquer les pouces
About the XBee® RR USB Adapter

Compatibility with other XBee devices

The XBee® RR USB Adapter can be programmed with Zigbee, 802.15.4, or DigiMesh 2.4
firmware. If your network does not operate on the same protocol that the XBee® RR USB Adapter
is programmed with, it will not be able to connect to your network. You can change the firmware on
the XBee® RR USB Adapter through XCTU.

LEDs

Characters sent from the computer to the XBee® RR USB Adapter through DIN illuminate the
white LED.
Characters sent from the XBee® RR USB Adapter to the computer through DOUT illuminate the
yellow LED.
The XBee Associate/DIO5 line is connected to the Blue LED. It indicates whether the XBee® RR
USB Adapter is powered and its network association status. This LED functions differently
depending on the RF protocol for the product, or you can configure it.
Digi XBee® RR USB Adapter User Guide
Compatibility with other XBee devices
7
loading