Lippert Backrest Manuel D'instructions page 7

Safety Warnings, Use and Maintenance

Keep these instructions for future reference.

Read the safety warnings before installing the product.

The manufacturer is not responsible for any damage caused by failure to comply with current

regulations, installation, transportation, and maintenance instructions, or improper use of the prod-

uct. The manufacturer declines any liability arising from improper use or incorrect assembly of the

product that may cause harm to people or property.

The product must be installed according to the provided instructions. Do not modify or alter the

product in any way.

Before installation, check the compatibility of the vehicle with the purchased product. If the ve-

hicle's anchoring surfaces are not sufficiently solid, they must be reinforced. Thoroughly clean all

support and anchoring areas of the product.

Choose screws/bolts appropriate for the material and condition of the support/wall/floor. If the user

does not have the necessary expertise to select the proper screws/bolts for the support/wall/floor

in use, they must contact a professional to install the product or obtain mounting instructions for

the specific support/wall/floor. Ensure that the product is securely fastened to the support/wall/

floor.

When the vehicle is in motion, the product must always remain closed and locked. Check that

there are no possible movements of the product due to improperly tightened screws/bolts. Failure

to follow these instructions may result in damage to people or property.

Comply with speed limits and traffic regulations of the country where the vehicle is being driven.

Speed must always be appropriate to traffic conditions and the transported load. Never exceed the

maximum allowed weight.

Do not use the product for any purpose or in any configuration not specified in these instructions.

This product is intended for installation on vehicles. Installation, commissioning, and testing must

be carried out by qualified and authorized personnel in compliance with the instructions contained

in the installation and user manual. Do not install the product using makeshift or improvised meth-

ods.

Children must not play with the product. When disposing of the product as waste, ensure that

any parts posing a potential danger are rendered harmless, particularly those that children might

use as toys. Packaging materials must be kept out of children's reach as they may pose hazards.

Packaging components must not be dispersed in the environment. Dispose of the packaging in

accordance with regulations set by local authorities.

Always keep the product clean and in proper working condition. To clean the product, avoid using

solvents that could damage its surfaces and functionality. It is recommended to use water and

soap. Dry the product after cleaning. Check for any objects or elements obstructing one or more

movements of the mechanism and remove them if necessary. Replace worn or damaged parts.

Use only original spare parts. Contact qualified installers or repairers.

Rev: 10.17.25

CCD-0009776-EU