Lippert Backrest Manuel D'instructions page 5

Installation
The linear actuator absorption is equal to 3.9A applying an additional load of 7kg.
Use a 5A fuse.
For cables with a section from 0.51 to 2.08 mm2 (20 – 14 AWG), use the faston
170340-1 from TE Connectivity.
Use the faston holder 4410170 from MTA S.p.A. or the 180924 from TE Connectivity
(they are interchangeable).
Rev: 10.17.25
Connect the electrical power of the bed
(12Vdc) to the designated control (to be
supplied by the customer). By connect-
ing +12Vdc with the red wire and GND
with the black wire, the bed rises. By
reversing the polarity, it lowers.
RED
BLACK
5
CCD-0009776-EU