Table des Matières
Publicité
Réparations
Afin d'éviter tout risque de dysfonctionnement, toutes les réparations DESKLINE
des réparateurs agréés par LINAK, car les réparations nécessitent l'utilisation d'outils et de joints spéciaux. Les colonnes sous
garantie doivent également être renvoyés à des ateliers agréés par LINAK.
Attention!
L'ouverture des produits DESKLINE
Attention!
Les systèmes DESKLINE
Déclaration du fabricant
Herewith declares that LINAK DESKLINE
Control Boxes
Linear Actuators
Lifting Columns
Desk Panels
RF Controls
Accessories
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.5.1 Electricity supply
The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into which
it is to be incorporated has been declared in conformity with the provisions of the Machinery
Directive 2006/42/EC where appropriate.
Nordborg,
Original Declaration
peut provoquer des dysfonctionnements.
®
ne supportent pas l'huile de coupe.
®
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
CBD6S
DB5, DB6, DB14, LA23, LA31
DL1A, DL2, DL4S, DL5, DL5IC, DL6, DL6IC, DL7, DL8, DL8IC, DL9, DL9IC,
DL10, DL10IC, DL11, DL11IC, DL12, DL14, DL15, DL16, DL16IC, DL17,
DL19, DL19IC, BASE1
DPA, DPB, DPH, DPF, DPG, DPT, DP, DP1CS
HB10RF, HB20RF, RFRL
BA001, BLE2LIN, DS1, DF2, Kick & Click, SLS, SMPS001, SMPS002, SMPS006
2019-05-27
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
®
products as characterized by the following models and types:
Page 8 sur 32
doivent être effectuées exclusivement par
®
Publicité
Table des Matières
