Beta RSC24/8-0 Mode D'emploi page 4

INSTRUCTIONS
OPERATION MANUAL
BETA UTENSILI
Via A. Volta 18
20845Sovico(MB) ITALIA
Originaldocumentationdrawnup in ITALIAN.
A CAUTION
Store the safety instructions with care and hand them over to the users.
TECHNICAL DATA
• Weight:66 kg
• Maximumcapacityof mobilerollercab: 300 kg (mobilerollercab plus load)
• Maximumapplicablestaticload, uniformlydistributedon surface:800 kg
• Drawercapacity:145 kg
no liMax
6 70mm 25k
2 140mm 30
All stated capacitiesshouldbe consideredto be uniformlydistributedon surfaces.
PURPOSE OF USE
The mobilerollercab shouldbe used for the storageand transportationof tools and equipmentin work
environments,accordingto such loadcapacitiesas listedin this manual.
WARNINGS OF USE
• Use the roller cab on flat, stable surfaces.
• Do not exceedthe maximumcapacityof each drawer and the roller cabas a whole.
• Do not open morethan one drawer at a time,to avoidoverturning.
• Do not use the rollercab for any applicationsother than those listedabove.
• Do not modifythe rollercab or any of its parts.
• Store the roller cab in closed environments, sheltered from the bad weather.
• In case of usewith portabletoolchests RSC22,RSC23,RSC23C,RSC23Tand C39T,the loadshould
be uniformly distributedon the drawers, thereby avoiding overloadingthe top. The overall weight
shouldalways be lowerthan the maximumcapacityof the rollercab.
MAINTENANCE
Maintenanceand repairjobs must be carried out by trained personnelonly. For such jobs, you can
contactBeta UtensiliS.P.A.'srepaircentrethroughyour Betadealer.
DISPOSAL
The roller cab, accessoriesand packagingshould be sent to a waste disposalcentre, in accordance
with the laws in force in your country.
4
FOR
AND INSTRUCTIONS
S.P.A.
IMPORTANT! READ
ULTRASONIC CLEANER.
STANDARDS AND OPERATING
SERIOUS INJURY
USE
FOR MOBILE
THIS MANUAL THOROUGHLY
FAILURE TO COMPLY
INSTRUCTIONS
ROLLER CAB MANUFACTURED
BEFORE USING
WITH THE SAFETY
MAY RESULT
EN
BY:
THE
IN