Lorell 34322 Instructions De Montage

Cam Locks Klix Cam
7 Pcs 7 Pcs
5 Pcs + 2 extra
+ 2 extra Pcs + 2 extra Pcs
STEPI
These instructions detail if the return
is to be positioned on the right side if
you are sitting at the desk. If you wish
for the return to be positioned on the
left, you will need to reverse the
position of the items accordingly
STEP3
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts
from being scratched
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before your start to assemble.
• Do not tighten all screws/bolts
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
6 Hole
L-Bracket
Adjustable Glide
Dowel
Pcs 4 pcs
IMPORTANT:
FUNCTION OF KLIX CAM
1/4 RIGHT
TURN FOR
LOCKING
MAKE SURE THE ARROW IS
POINTING UPWARDS
BEFORE INSERTING INTO
THE PANEL' S HOLE.
Repeat 4 X
Insert three additional
locks and cams
additional positions
provided. (Two in the
underside of the
worksurface and
panel and one additional
the side and back panels)
O
until pieces are completely assembled
60mm
Screw #4 x 5/8"
Grommet
2 Pcs 2 Pcs
12 Pcs + 2 extra Pcs
STEP2
cam
in the
back
in
O
Insert
two L-Brackets
It is easier to install
brackets to the
unit first rather
unit. This allows
installation of the
securing the return unit to the
desk unit top, install the additional
third flat back to the back panel of
the return unit and desk leg
Secure all brackets
screws in each
Once the return unit has been properly
installed, cover all exposed Klix Cams
with the Stickers provided
Reversible
Black
Cam Cover
- Bracket
7 Pcs
2 Pcs
+ 2 extra Pcs
Insert the four adjustable
glides in the back panel
and side eg panel as shown
4 each screws in the
as shown
two of the flat
assembled desk
than the return
for easier
return unit. After
with four
R3/07
Return Shell
34322/34323
Screw M6 x 20mm Cam Covers
12 pcs 5 pcs
Two PEOPLE ARE REOUIREO TO
ASSEMBLE AND MOVE THIS MODEL