Lorell 69387 Instructions D'assemblage

Assembly Instructions
Assembly Instructions
Cam Locks Klix Cam
Cam Locks Klix Cam
7 Pcs 7 Pcs
7 Pcs 7 Pcs
5 Pcs + 2 extra Pcs
+ 2 extra Pcs + 2 extra Pcs
5 Pcs
+ 2 extra Pcs + 2 extra Pcs
STEP 1
STEP 1
These instructions detail if the return
These instructions detail if the return
is to be positioned on the right side if
is to be positioned on the right side if
you are sitting at the desk. If you wish
you are sitting at the desk. If you wish
for the return to be positioned on the
for the return to be positioned on the
left, you will need to reverse the
left, you will need to reverse the
position of the items accordingly
position of the items accordingly
STEP 3
STEP 3
COMPLETED ASSEMBLY
COMPLETED ASSEMBLY
IMPORTANT NOTE:
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts
from being scratched.
from being scratched.
• Check to make sure that you have all parts and hardware.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before your start to assemble.
• Remove all wrapping materials, including staples and packaging straps before your start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Do not tighten all screws/bolts
• Keep all hardware parts out of children's reach.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
• It is recommended for 2 persons to complete this assembly.
69387/69421/69979, 69388/69422/69980, 69389/69423/34400
69387/69421/69979,
6 Hole
Dowel
L-Bracket
Adjustable Glide
Dowel
+ 2 extra Pcs 4 pcs
IMPORTANT:
FUNCTION OF KLIX CAM
1/4 RIGHT
TURN FOR
LOCKING
WAKE SURE THE ARROW IS
POINTING UPWARDS
BEFORE INSERTING INTO
THE PANEL' S HOLE.
Repeat 4 X
Repeat 4 X
Insert three additional cam
Insert three additional
locks and cams in the
locks and cams
additional positions
additional positions
provided. (Two in the
provided. (Two in the
underside of the
underside of the
worksurface and back
worksurface and
panel and one additional in
panel and one additional
the side and back panels)
the side and back panels)
O
until pieces are completely assembled.
69388/69422/69980,
69554/69555/18215/18216/69594/18263
69554/69555/18215/18216/69594/18263
60mm
Screw #4 x / "
5
Screw #4 x 5/8" Grommet
8
12 Pcs + 2 extra Pcs
2 Pcs 2 Pcs
12 Pcs + 2 extra Pcs
STEP 2
STEP 2
cam
in the
back
in
O
Insert 4 each screws in the
Insert
two L-Brackets as shown
two L-Brackets
It is easier to install two of the flat
It is easier to install
brackets to the assembled desk
brackets to the
unit first rather than the return
unit first rather
unit. This allows for easier
unit. This allows
installation of the return unit. After
installation of the
securing the return unit to the
securing the return unit to the
desk unit top, install the additional
desk unit top, install the additional
third flat back to the back panel of
third flat back to the back panel of
the return unit and desk leg.
the return unit and desk leg.
Secure all brackets with four
Secure all brackets
screws in each.
screws in each.
Once the return unit has been properly
Once the return unit has been properly
installed, cover all exposed Klix Cams
installed, cover all exposed Klix Cams
with the Stickers provided.
with the Stickers provided.
Reversible Return Shell
Reversible
69389/69423/34400
Black Cam Cover
Cam Cover
I-Bracket
I-Bracket
7 Pcs
7 Pcs
2 Pcs
2 Pcs + 2 extra Pcs
+ 2 extra Pcs
Insert the four adjustable
Insert the four adjustable
glides in the back panel
glides in the back panel
and side leg panel as shown
and side leg panel as shown
IMPORTANT:
IMPORTANT:
If attaching pedestal(s)
If attaching
LLR69398/69432/69987
LLR69398/69432/69987
/69562,remove L brackets
169562,remove
from leg panel.
from leg panel.
4 each screws in the
as shown
two of the flat
assembled desk
than the return
for easier
return unit. After
with four
Return Shell
K
Screw M6 x 16mm Cam Covers
Screw M6 x 16mm Cam Covers
12 Pcs 5 Pcs
12 Pcs 5 Pcs
pedestal(s)
L brackets
Two PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL