Applications; Safety Directives; Extent Of Supply - Elbro SMS Switch Butler SMSB10 BD Mode D'emploi

SMSB10 BD V1.01

1.3 Applications

Building control
Industrial plants
Pumping stations
Water distribution systems
Traffic engineering/ Railway technology / Vehicles
Energy management
Purification plants
Combined heat and power plants

1.4 Safety Directives

Installation of the SMSB10 BD is to be carried out by an electrical specialist.
The SIM card owner is solely responsibility for protecting against misuse of the card.
The momentary system status remains upon power outage.
2 Commissioning

2.1 Extent of Supply

SMSB10 BD
Antenna
These Operating Instructions
2.2 Functional Prerequisites
Obtaining an SIM Card:
You can obtain a personal SIM card from the mobile telephone company of your choice.
You will receive a telephone number and a PIN code with your SIM card.
Preparing the SIM card to be used in your SMSB10 BD:
- Insert the SIM card into your mobile phone.
- Deactivate the PIN interrogation.
- Delete all entries from the telephone book of the SIM card.
- Now make the following entries in your telephone book:
st
1 digit
nd
2 digit
From the 3
Carry out the entries in accordance with the instructions for your mobile.
Mobile Signal Availability:
Before installing your SMSB10 BD, ensure smooth operation by checking its installation
location—use your mobile phone to make certain that an adequate signal is continually
receivable there from your mobile network.
22
Name: Operation
Entry: 0: Bistable relay function where the output state changes
for each call.
1 to 10: Relay switches ON for 1 to 10 sec for each call.
Name: SMS
Entry: 0: No acknowledgement is returned to the command issuer
following a switching sequence.
1: An acknowledgement SMS is returned to the command
issuer following each switching sequence.
rd
digit: Telephone numbers of users authorised to operate the
unit.