Safety Regulations; Use Of The Shades; Anchorage; Electrical Installation - Glatz AMBIENTE Instructions De Montage Et D'emploi

Masquer les pouces Voir aussi pour AMBIENTE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
|
14

1. SAFETY REGULATIONS

The safety instructions, together with the technical information for the
fitting and operation, form the basis for using the shades without dan-
ger. They are to be read through before installing an using the shades,
to be obeyed and to kept in a save place for later need.
• Any disregard of safety regulations and the in-
structions for erection and operation can result in
serious damage to people and material for which
the manufacturer expressly refuses to accept any
liability or obligation under warranty!
• If the wind freshens up or gales gusts are
approaching, the sunshade must be shut.
• Unsupervised sunshades must not be left open.
A unexpected stormy wind could cause heavy
damages!

1.1 Use of the shades

The Glatz large shades are intended exclusively as weather resistant
sun protection. The wind resistance of the extended shade is limited
and the details on this presuppose an anchorage in accordance with
the instructions. Movable bases are less stable than bases which are
fixed to the ground.

1.2 Anchorage

The ground anchorage is to be fitted in accordance with the technical
information in "Fitting Instructions Ground Socket" and "Fitting
Instructions Mounting Plate" respectively. Please take note of the
dimensions for the shade type concerned and its sizes. Fitting has to
be carried out by a person with the necessary specialist construction
knowledge. The version is to be in concrete or in a material of like
strength. Local regulations are to be observed.

1.3 Electrical installation

Shades with electric equipment must be connected by a recognised
specialist fitter in accordance with the fitting instructions and connected
to the mains power supply in accordance with local regulations.

1.4 Kindly note the following

• Be sure to comply with the operating instructions.
• Never place the large shade unsecured against a wall, it could slip
away and tip over.
• Before opening or closing the shade, check that there are no
obstacles in the operating area.
• The shade must not be altered or draped with a different material.
The stability in wind and closing function may deteriorate.
• Use the shade only in a undamaged state and take notice of any
faults.
• Use only original Glatz accessories and spares in order to have the
guarantee for full safety, unspoilt convenience and perfect functioning.
• When fitting or removing a protective sleeve, if necessary use a
free-standing, stable climbing aid. Make sure that this can neither
tip over or slip away.
• If used in exposed locations, for example near the coast or in regions
with heavy winds, increased wear is to be expected. In these cases,
we recommend more intensive maintenance.

Publicité

Table des Matières
loading

Table des Matières