BENE AL Instructions De Montage Et D'utilisation page 8

SAFETY INSTRUCTIONS
10. If the power cord of this equipment is
damaged, it must be replaced by the
manufacturer, their customer service, or
a similarly qualified person so as to avoid
any risk.
11. Do not spill liquids into the control unit
or power supply unit, as this could cause
electrical shock or short circuits.
12. The operation of the control mechanism
and the power supply unit requires a
minimum of 5°C and a maximum
temperature of 40°C.
13. For the above reasons do not install the
control unit:
- above or in front of heat sources
(e.g. radiators)
- at places exposed to direct sunlight
- in small, unventilated or humid rooms
- near easily flammable materials
- near high-frequency devices
(e.g. transmitters, radiation equipment,
or similar devices)
Please note: Please note: If the product
is visibly damaged it must not be
installed or used further.
8