Warnings; Compatibility Requirements - Gecko In.xtend Manuel

Warnings

WARNINGS
Before installing or connecting the unit, please read the following
* ALWAYS INSTALL THE PRODUCT ACCORDING TO THE INSTRUCTIONS PROVIDED
* THIS PRODUCT SHOULD NOT BE INSTALLED IN PROXIMITY TO HIGHLY FLAMMABLE MATERIALS
ANY SURROUNDING MATERIALS SHOULD BE RATED UL94–HB, OR HIGHER
* THIS PRODUCT SHOULD BE INSTALLED IN A LOCATION THAT WILL MINIMIZE THE POSSIBILITY OF WATER
INGRESS
* DO NOT CREATE ANY OPENINGS IN THE PRODUCT
* ANY CABLES SUPPLIED CANNOT BE EXTENDED AND/OR MODIFIED, UNLESS AUTHORIZED BY THE
MANUFACTURER OF THE PRODUCT
* THE VARIOUS PARTS OF THE PRODUCT MAY HAVE PLASTIC HOUSINGS THESE CANNOT BE EXPOSED TO ANY
CHEMICAL SUBSTANCE SUCH AS (BUT NOT LIMITED TO) OILS, GREASES, SOLVENTS, RUST INHIBITORS, ETC
FOR EXAMPLE, WD-40® AND LOCTITE® ARE NOT CONSIDERED COMPATIBLE

Compatibility requirements

in.xtend module:
Model: 0608-521013
Model: 0608-521014
Compatible spa packs:
inxm, inxm2, inxe, inye, inyt and inyj with appropriate software revisions
Compatible keypads:
K-5, K-8, K-52, K-45, K-56, K-72, K-73, K-85, INK100, INK3XX, INK4XX and INK6XX (Static)
Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group intouch™,
inxm2™, inxm™ inxe™, inyt™, inye™, inyj™ and intherm™, K-5™, K-8™, K-52™, K-45™, K-56™, K-72™, K-73™, K-85™,
INK100™, INK300™, INK400™ et INK600™ and their respective logos are Trademarks of Gecko Alliance Group
All other product or company names that may be mentioned in this publication are tradenames, trademarks or
registered trademarks of their respective owners
2
INTR-KX-PK
INTR-KX-KY
in.xtend TechBook