Vornado PCO200 Manuel D'utilisation page 17

8. Replace Front Panel by aligning and gently pushing the top of
Front Panel with tabs located on the unit (F). Then connect the bot-
±
tom of Front Panel (G) with magnets located at bottom of unit.
±
G
Safety Shut-Off Feature
For your protection, the unit is designed to operate only if the Front
Panel is in place. Do not attempt to override this safety feature. If,
after the Front Panel has been reinstalled, the unit does not operate,
remove and reinstall the Front Panel to assure proper placement.
F
Filter Replacement
9. To reset the Replacement notification - Press and hold the RE-
PLACE CARBON, REPLACE HEPA, REPLACE SCREEN, REPLACE
UV BULB, depending on which item was replaced, for at least 3
seconds. The light will turn off confirming the indicator is reset.
Press for 3 seconds.
CARBON HEPA
Note: Do not operate the Air Purifier without Vornado Advanced
Carbon Filter and Vornado HEPA Filter in place.
Press for 3 seconds.
UV BULBS CREEN
AJAR
English 17