Table des Matières

2.7 DOORS REVERSAL

Parts included with the hinge kit:
Left stopper (2)
Spacer
Parts already mounted on the
refrigerator (as shipped):
Right stopper
Hole cap (2)
Top hinge screw
Middle hinge
Middle hinge screw
Bottom hinge
·
Power o the refrigerator, and
remove all articles from the door
trays.
·
Remove the top hinge cover,
then remove the top hinge
screws, top hinge ,and hole cap
which is
fi ed on another side .
x
Spout plug
Right stopper screw
Top hinge cover
Top hinge
adjustable foot
EN-13
·
Remove the refrigerating door,
the middle hinge and the hole caps.
·
Remove the freezer door, remove
the bottom hinge , and adjustable
foot on another side.
·
Exchange the
fi ed position of the
adjustable foot and the bottom
hinge , then fix them again.
·
Remove the screws and stoppers
which are x
fi ed on the bottom
cover of the refrigerating door
and the freezer door.
·
Take out two stoppers from the
attached palstic bag , fix the
stoppers with screws on another
side of the bottom cover of the
refrigerating door and the freezer
door.
x
Table des Matières
loading

Table des Matières