Publicité
Simplified declaration of conformity
Intenso International hereby declares that these radio installation type Intenso Buds Micro T200
comply with Directive 2014/53/EU. You can read the full text of the EU Declaration of Conformity by
visiting the following site: www.intenso.de.
SCOPE OF DELIVERY
Intenso Buds Micro (2x)
1
Eartips in 4 different sizes
2
Charging case
3
Please check that the contents of the packaging are complete and undamaged (see also the illust-
ration at the start of this manual). If this is not the case, please contact the retailer or our service
department: rma@intenso-international.de
User guidelines
Product overview
1 - Status LED
2 - Touch sensor
3 - Bud left
4 - Bud right
5 - USB-C input
Battery
The charging box and the buds both contain an integrated battery. Please make sure that it is fully
charged before first use. It takes approx. 2 hours to charge the buds inside the charging box and
charging starts as soon as they are returned to the charging box. The charging box also takes approx. 2
hours to charge. Simply connect the USB-C port to a suitable power source (5V-1A) using the supplied
USB-C to USB-C cable, and the USB-C end to the charging box (USB-C In). The charging process is
indicated by the 4 LEDs. Each LED represents 25% charging capacity. The first LED will be on and the
next LED will start flashing when 25% capacity has been reached. The first 2 LEDs will be on at 50%,
the first 3 at 75%, and all 4 LEDS will be on when the battery has charged completely.
2
1
3
4
EN - Page 4 of 9
USB-C to USB-C cable
4
Operating Instructions
5
5
Publicité
