GE Monogram ZGG300LC Instructions D'installation page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REMOVE PACKAGING FROM CART MODELS (cont.)
8. Position the blade of the dolly next to the right
side of the grill. Tilt the grill back and away to
allow blade to slip under the wheels.
NOTE: The wheels must rest on the blade
of the appliance dolly.
Secure the appliance
dolly belt around the
grill above or below
the controls to avoid
damage to the knobs.
9. Tilt and lift with the appliance dolly to remove the
skid from below the grill.
Wheels must be
positioned ON the
blade of the appliance dolly.
Installation Preparation
14
10. Roll the grill into operating position. Reinstall the
shelf on the right side.
11. Remove the tie holding the sear burner (on
some models). Lift the wire mesh cover on the
sear burner and remove packaging. Carefully,
replace the wire mesh cover. The wire mesh
must be wrapped around the vertical side
flanges.
Lift wire mesh and
remove packaging.
Replace wire
mesh cover.

Publicité

Table des Matières
loading

Table des Matières